Features and Benefit
The EX 600 Value is available with a conveyor reception only. It will punch pre-collated printed documents with or without mixed stocks which will be re-delivered in the pre-collated sequence.
It will take up to 600 mm long sheets which combined with the max punching width of 600mm allows to punch a wide variety of documents ranging from small booklets up to large size calendars.
The separator beak and feeder air blower provide optimum feeding consistancy especially with mixed stocks and large format sheets.
Paper can be loaded continuously without stopping the machine by the means of lightweight aluminium trays rising automatically.
Byte thickness can be adjusted to take a maximum of 2.0mm according to the paper quality.
Sheets are automatically aligned in both directions and there is no contact with the transport belts during the punching to ensure unmarked sheets.
Tool and format changeover are easy and very fast.
Conveyor reception enables to run the machine non stop which provides high output and optimum productivity / operator.
Main Technical Characteristics
EX 600 Value Conveyor | |
---|---|
Maximum sheet sizes (mm) | 600mm (punched edge) x 600mm |
Minimum sheet sizes (mm) | 110mm (punched edge) x 95mm |
Maximum byte thickness | 2mm |
Paper thickness | 60 to 500gsm |
Maximum punching speed | 45 cycles / minute for sheet over 530 long 90 cycles / minute for shorter sheet |
Power supply | 380V / 3ph / 50Hz |
Air supply (not included) | 6 bar (if feeder air blower is being used) |
Dimensions (LxDxH) in mm | 2,80m x 1,32m x 1,40m |
Net weight | 1,300 Kg |
Add Comment